Automotive Motorcyles

Modifying a Car In Order To Looks Stunning

Fri, 17 Feb 2012 07:43:07 +0000

Having a car is certainly a dream of many people living in this planet. Some even like to spend much money in order to make appearance of a car looks stunning. Ranging from traditional to futuristic idea, some cars have been modified that often reflect who the owner really is. If you have a car and want to make a difference, then looking for auto lights that fit your interest can be a choice. You, in other words, need to change some lights of your car in order to make the vehicle looks good.

Thanks to the internet, it seems buying some accessories for car mods is easy. You without a doubt can go to Go-part.Com where a range of high quality lights are available. Here you will find chevy silverado taillight available in competitive prices. Taillights that are suitable for some top brands like Honda and Audi also exist at the online store.

Fast shipping is certainly a plus point when it comes to purchasing auto lights at Go Part and you can choose certain products by using system of search. What are you waiting for? It is the moment to make your vehicle gets something special and having it modified can be your choice.

Tips & Tricks Disassemble the Carburetor Plug

Tue, 06 Sep 2011 10:28:39 +0000

Perhaps the most teman2 already on good in terms of motorcycle carburetor unloading
But do not hurt I love again … especially miss the thing observed by us …. may be useful for us all …
1. Spray the hole at the bottom of the reservoir carburetor with carburetor cleaner fluids such as DCS while the accelerator pump lever on the press and press (see picture), so that dirt can hide in a hole they will be out. TSB hole is where most of the fuel flow that will be sprayed through an accelerator pump. Usually prefer to forget / not at all to ever clean the holes they will be, because if they will be clogged by dirt hole then pump the accelerator will be reduced supply and the effect it will get heavy traction engines.

2. Set the gas cable antecedent Accelerator Pump by playing ulirnya then tightened with a nut below its lock.whereas who is baseball right, pumps his krn be not optimal due to spray gasoline gas cable is too slack

3. At the time carefully reassemble the carburetor lever rubber cover pump akselator not to pinch the gap between bottom and top of carburetor. Reply to pinch will cause leaks in the carburetor. If leaking gasoline seeped so, stationary so not flat, slow pull, and who certainly wasteful of gasoline.

4. Before installing the carburetor on his intake, preferably needle skepticism (throttle valve) inserted into the hole first. But be aware not mistake his position of skepticism must go perfectly

Two-stroke engine

Tue, 06 Sep 2011 09:30:23 +0000

The two-stroke engine was very popular throughout the 20th century in small-engined motorcycles and devices, Such as chainsaws and outboard motors , and was also used in some cars, A Few tractors and many ships. Part of their appeal was their simple design (and resulting low cost) and often high power-to-weight ratio . Their appeal was part of Their simple design (and resulting low cost) and Often high power-to-weight ratio . Many designs use total-loss lubrication, with the oil being burned in the combustion chamber, causing “blue smoke” and other types of exhaust pollution. Many designs use a total-loss lubrication, with the oil being burned in the combustion chamber, Causing “blue smoke” and other types of exhaust pollution. This is a major reason for two-stroke engines being replaced by four-stroke engines in many applications. This is a major reason for a two-stroke engines are being replaced by a four-stroke engines in many applications.

Two-stroke engines continue to be commonly used in high-power, handheld applications such as string trimmers and chainsaws . Two-stroke engines continue to be commonly used in high-power, handheld applications, Such as string trimmers and chainsaws . The light overall weight, and light-weight spinning parts give important operational and even safety advantages. The overall light weight, and light-weight spinning parts give Important operational and safety advantages events. For example, only a two-stroke engine that uses a gasoline-oil mixture can power a chainsaw operating in any position. For example, only a two-stroke engines That uses a gasoline-oil mixture can power a chainsaw operating in any position.

These engines are still used for small, portable, or specialized machine applications such as outboard motors , high-performance, small-capacity motorcycles , mopeds , underbones , scooters , tuk-tuks , snowmobiles , karts , ultralights , model airplanes (and other model vehicles) and lawnmowers . These engines are still used for small, portable, or specialized machine applications Such as outboard motors , high-performance, small-capacity motorcycles , mopeds , underbones , scooters , tuk-tuks , snowmobiles , karts , ultralights , model airplanes (and other models vehicles) and lawnmowers . The two-stroke cycle is used in many diesel engines , most notably large industrial and marine engines, as well as some trucks and heavy machinery. The two-stroke cycle is used in many diesel engines , most Notably large industrial and marine engines, as well as some trucks and heavy machinery.

A number of mainstream automobile manufacturers have used two-stroke engines in the past, including the Swedish Saab and German manufacturers DKW and Auto-Union . A number of mainstream automobile manufacturers have used a two-stroke engines in the past, including the Swedish Saab and German manufacturers DKW and Auto-Union . The Japanese manufacturer Suzuki did the same in the 1970s.Production of two-stroke cars ended in the 1980s in the West , but Eastern Bloc countries continued until around 1991, with the Trabant and Wartburg in East Germany . Lotus of Norfolk, UK, has a prototype direct-injection two-stroke engine intended for alcohol fuels called the Omnivore which it is demonstrating in a version of the Exige . The Japanese manufacturer Suzuki did the same in the 1970s. Production of a two-stroke cars ended in the 1980s in the West , but Eastern Bloc countries Continued until around 1991, with the Trabant and Wartburg in East Germany . Lotus of Norfolk, UK, has a prototype direct-injection two-stroke engines intended for alcohol fuels Called the omnivore the which it is demonstrating in a version of the Exige

Motorcycle Specifications – Definitions of Terms Motorcycle Specifications – Definitions of Terms

Tue, 06 Sep 2011 09:21:36 +0000

The following provides definitions of terms to demystify motorcycle specifications as usually listed in the motorcycle magazines and on Internet Web sites. These definitions of terms should be easier to understand by riders who would rather ride than learn the technical complexities of their machines. These definitions of terms Should Be Easier to Understand by WHO riders would rather ride than learn the technical complexities of Their machines. Bear in mind that whole books could be written about each term. Bear in mind That Could be whole books written about each term. We are only touching the basics. We are only Touching the basics.

The following message, posted on a motorcycle forum that I used to run, was the motivation for me to provide these definitions of terms used in motorcycle specifications. The following message, posted on a motorcycle forum that i used to run, was the motivation for me to Provide these definitions of terms used in motorcycle specifications.

“OK, I admit I am probably the polar opposite of a gearhead, whatever that is. But yesterday, I had an eleven-year-old grilling me about my bike, and I suddenly realized that I could probably compute this stuff if someone would translate it into non-gearhead language for me. I have the stats for my bike in front of me. What do they mean? I would really appreciate a translation that lies somewhere on the technical jargon continuum between ‘it goes really fast when you turn the throttle’ and what appears in these specs.” “OK, I admit I am Probably the Polar Opposite of a gearhead, whatever That Is. But yesterday, I had an eleven-year-old grilling me about my bike, and Suddenly I realized That I Could Probably compute this stuff if someone would translate it into a non-gearhead language for me. I have the stats for my bike in front of me. What do They mean? I would really appreciate a translation That lies somewhere on the continuum of technical jargon of the between ‘it goes really fast you turn Pls the throttle ‘and what Appears in these specs. “

To help this forum member and probably countless others seeking to learn more about their bikes, I’m supplying these definitions of terms used in typical motorcycle specifications. To help this forum member and Probably countless others seeking to learn more about Their bikes, I’m supplying these definitions of terms used in typical motorcycle specifications.

Engine: Engine:

Type: Type:
- No. No. of Strokes: Engines in motorcycles discussed on this site are all four-stroke. of strokes: Engines in motorcycles discussed on this site are all four-stroke. There are two-stroke engines as well. There are two-stroke engines as well. Also, don’t confuse four-stroke with four-cylinder or two-stroke with two-cylinder. Also, do not confuse four-stroke with four-cylinder or with two-stroke two-cylinder. They are totally different. They are totally different. The four strokes in a four-stroke engine are defined as follows: The four strokes in a four-stroke engines are defined as follows:
  - Stroke 1 – Intake valve(s) open, piston moves down, sucking in the air/fuel mixture. Stroke 1 – Intake valve (s) open, piston moves down, sucking in the air / fuel mixture.
  - Stroke 2 – All valves closed, piston moves up, squeezing the mixture. Stroke 2 – All valves closed, the piston moves up, squeezing the mixture.
  - Stroke 3 – All valves still closed, spark plug ignites the fuel/air mixture, pushing the piston down. Stroke 3 – All valves still closed, the spark plug ignites the fuel / air mixture, pushing the piston down.
  - Stroke 4 – Exhaust valve(s) open, piston moves up, blowing the old charge out the exhaust valves. Stroke 4 – Exhaust valve (s) open, piston moves up, blowing the old charge out the exhaust valves.
  - A short version is Suck, Squeeze, BANG, and Blow. A short version is Suck, Squeeze, Bang, and Blow.
- Cooling: An engine can be liquid-cooled by running coolant through the engine and exchanging the heat via a radiator like a car. Cooling: An engine can be liquid-cooled by running coolant through the engine and exchanging the heat via a radiator like a car. It can also be air-cooled by airflow over fins on the engine. It can also be water-cooled by airflow over fins on the engine. Another variation is oil-cooling where engine oil is circulated in the engine and its heat exchanged by a small radiator. Another variation is where engine oil, cooling oil is circulated in the engine and its heat exchanged by a small radiator. There are even oil/air/fan cooling systems. There are even oil / water / fan cooling systems.
- Valves: Valves are used as mentioned above. Valves: Valves are used as Mentioned above. There may be one or more valves used for intake and exhaust. There may be one or more valves used for the intake and exhaust. The specs may indicate how many valves are used per cylinder or for the whole engine. The specs may indicate how many valves are used per cylinder or for the whole engine. Terms such as SOHC (Single OverHead Cam) and DOHC (Double OverHead Cam), etc. Such terms as SOHC (Single Overhead Cam) and DOHC (Double Overhead Cam), etc. are used to indicate how the valves are opened and closed. are used to indicate how the valves are opened and closed. There are other methods to operate the valves as well. There are other methods to operate the valves as well.
- Number of Cylinders: Engines can have one to six cylinders. Number of Cylinders: Engines can have one to six cylinders.A single-cylinder engine, sometimes called a thumper, is used in small bikes. A single-cylinder engine, Sometimes Called a Thumper, is used in small bikes.
  Most bikes have engines with two-cylinders arranged in many configurations including: V-twin where the cylinders are spaced at a particular angle to each other; Parallel twin where the two cylinders are right next to each other in a vertical position; and Flat-twins where the two cylinders are opposed such as in BMW Boxers. Most bikes have two-cylinder engines with Arranged in many configurations including: V-twin where the cylinders are spaced at a particular angle to each other; Parallel twin where the two cylinders are right next to each other in a vertical position; and Flat- twins where the two cylinders are opposed Such as in the BMW Boxers.
  
  Engines may have more than two cylinders such as: Triples where three cylinders are lined up next to each other in a vertical position; In-line fours similar to a triple except with another cylinder added; V-4 engines such as used in Honda ST1300; V-6 engines such as used in Boss Hoss; Flat-six engines such as used in Honda Gold Wing 1500/1800s. Engines may have more than two cylinders Such as: triples where three cylinders are lined up next to each other in a vertical position; In-line fours similar to a triple except with another cylinder added; V-4 engines Such as used in the Honda ST1300 ; V-6 engines Such as used in Boss Hoss; flat-six engines Such as used in the Honda Gold Wing 1500/1800s.
  
  There are other engines not described. There are other engines are not described.
Displacement: Displacement is the volume displaced in the cylinders of an engine as the pistons move from their bottom position to their highest position in the cylinders. Displacement: Displacement is the volume displaced in the cylinders of an engine as the pistons move from Their bottom position to Their highest position in the cylinders. Displacement is measured in either cubic centimeters (CC) or cubic inches (CI). Displacement is Measured in either cubic centimeters (CC) or cubic inches (CI).
Bore and Stroke: Bore is the diameter of the cylinder in the engine in which a piston moves up and down. Bore and Stroke: Bore is the diameter of the cylinder in the engine in the which a piston moves up and down. Stroke is the distance that the piston moves up and down inside the cylinder. Stroke is the distance the piston moves That ups and downs inside the cylinder.
Fuel System: Either carburetor(s) or fuel injection is used to control the mixture of air and gasoline and prepare it to be sucked through the intake valves and into the cylinders during Stroke 1, described above. Fuel System: Either carburetor (s) or fuel injection is used to control the mixture of water and gasoline and prepare it to be sucked through the intake valves and into the cylinders During Stroke 1, described above. Specs usually identify the carburetor name and how many carburetors are used. Specs usually identify the name and how many carburetor carburetors are used. Fuel injection comes with different names such as Fuel Injection (FI), Digital Fuel Injection (DFI), Electronic Sequential Port Fuel Injection (ESPFI), Programmed Fuel Injection (PGM-FI), etc. Fuel injection comes with different names Such as Fuel Injection (FI), Digital Fuel Injection (DFI), Electronic Sequential Port Fuel Injection (ESPFI), Programmed Fuel Injection (PGM-FI), etc.
Compression Ratio: Here’s a definition from Motorcycles Forum moderator, Bill Wood: Compression Ratio: Here’s a definition from Motorcycles Forum moderator, Bill Wood:
Maximum Torque: Torque is described as twisting force. Maximum Torque: Torque is twisting force as described. This is the maximum amount of twisting force the engine can put out and at what value of engine Revolutions Per Minute (RPM). This is the maximum amount of twisting force the engine can put out and at what value of engine Revolutions Per Minute (RPM). Put simply, torque is the “grunt, stretch your arms, push your eyeballs into their sockets” quality when you aggressively use the throttle and accelerate hard. Put simply, torque is the “grunt, stretch your arms, push your eyeballs into sockets Their” quality Pls aggressively you use the throttle and Accelerate hard. The higher the number, the more forceful that feeling is. The higher the number, the more Forceful That feeling is.
Maximum Horsepower: This is the maximum amount of horsepower delivered by the engine. Maximum Horsepower: This is the maximum amount of horsepower delivered by the engine. It occurs at a particular engine speed. It Occurs at a particular engine speed. Horsepower (HP) and torque are interrelated with RPM by the formula HP = TORQUE X RPM / 5252. Horsepower (HP) and torque are interrelated with RPM by the formula HP = TORQUE X RPM / 5252.

The Most Environmentally Friendly Motorcycles

Tue, 06 Sep 2011 09:04:42 +0000

Electric motorcycles are one of the best transportation solutions for water pollution. They provide a “greener” option in traveling, producing zero air pollution. They Provide a “Greener” option in traveling, producing zero water pollution. They typically use a single-speed transmission and don’t require a clutch. They typically use a single-speed transmission and do not require a clutch. The life span of the batteries is about 300 charges, or about 9,320 miles. The life span of the batteries is about 300 charges, or about 9.320 miles.

The blades of an electric motorcycle don’t produce any noise pollution. The blades of an electric motorcycle do not Produce any noise pollution. When compared to traditional motorcycles, electric motorcycles are lightweight. When compared to traditional motorcycles, electric motorcycles are lightweight. They’re available in a wide range of models and colors, and the average model costs a little under $7000. They’re available in a wide range of models and colors, and the average model costs a little under $ 7000.

Let’s take a look at some of the best environmentally friendly electric motorcycles available (and soon to be available): Let’s take a look at some of the best available environmentally friendly electric motorcycles (and soon to be available):

Brammo Brammo

Motorcycle.com named the Brammo Enertia the best electric motorcycle. Motorcycle.com named the Brammo Enertia electric motorcycle the best. The 100% electric motorcycle costs a little less than $8,000. The 100% electric motorcycle costs a little less than $ 8,000. The company reports the motorcycle gets 40+ miles per charge in urban commuting. The company reports the motorcycle gets 40 + miles per charge in urban commuting.

Many of the components are made from recycled materials, and the Enertia itself can be recycled. Many of the components are made from recycled materials, and the Enertia Itself can be recycled. The motorcycle uses lithium iron phosphate batteries. The motorcycle uses lithium iron phosphate batteries. The company states the batteries can be recycled for many other uses. The company states the batteries can be recycled for many other uses.

The Enertia Plus Electric Motorcycle , the step up in Brammo’s line of electric bikes, gets 80+ miles per charge in urban commuting. The Enertia Electric Motorcycle Plus , the step up in Brammo’s line of electric bikes, gets 80 + miles per charge in urban commuting.

Due to its innovative digital drive train technology, Brammo’s Empulse Electric Motorcycle can exceed 100 mph for sustained periods of time. Due to its innovative digital drive train technology, Brammo’s Empulse Electric Motorcycle can exceed 100 mph for sustained periods of time.

Marone Moto Marone Moto

A Canadian company manufactures the Marone Moto bike. A Canadian company manufactures the Marone Moto bike. The company claims that nearly every aspect of its electric bike is environmentally friendly. The company claims That Nearly every aspect of its electric bike is environmentally friendly.

Zero DS Zero DS

The Zero DS, manufactured by Zero Motorcycles , is regarded as one of the best electric motorcycles on the market. The Zero DS, manufactured by Zero Motorcycles , is regarded as one of the best electric motorcycles on the market. It’s suitable for on-road and off-road riding and weighs less than most gas scooters. It’s Suitable for on-road and off-road riding and weighs less than most gas scooters. It’s lightweight frame is made from aircraft grade aluminum. It’s lightweight frame is made from aircraft grade aluminum. The new Z-force Air Induction system allows the Zero DS to input more power from the motor by efficiently moving air through its core. The new Z-Force Air Induction system allows the Zero DS to input more power from the motors by efficiently moving water through its core.

Its top speed is about 67 mph and it has a range of about 50 miles. Its top speed is about 67 mph and it has a range of about 50 miles. The Zero DS costs a little less than $10,000. The Zero DS costs a little less than $ 10,000. The 2011 version includes an innovative quick charge option which reduces the charging time by half. The 2011 version includes an innovative quick charge option the which reduces the charging time by half.

The Zero S , an on-road version, has a shorter suspension than the Zero DS and includes slick tires. The Zero S , an on-road version, has a shorter suspension than the Zero DS and includes slick tires. It has the same top speed, miles range, and price of the Zero DS. It has the same top speed, miles range, and price of the Zero DS.

Popular Mechanics’ Electric Motorcycles Buyer’s Guide includes essential details for a collection of electric motorcycles. Popular Mechanics’ Electric Motorcycles Buyer’s Guide includes essential details for a collection of electric motorcycles.

Eco-Friendly Prototypes Eco-Friendly prototypes

Check out the photographs and descriptions of some of the cool, innovative eco-friendly prototypes. Check out the photographs and descriptions of some of the cool, innovative eco-friendly prototypes. The SunRed prototype is a solar powered motorcycle. The SunRed prototype is a solar powered motorcycle. Since the surface area of a motorcycle is small, an arc of solar panels is raised over the motorcycle when it’s parked, in order to charge the battery. Since the surface area of a motorcycle is small, an arc of solar panels is raised over the Pls it’s parked motorcycle, in order to charge the battery. When parked, the motorcycle looks like a large armadillo with handlebars. When parked, the motorcycle looks like a large armadillo with handlebars. The panels also work when the solar panels are down but at a greatly reduced rate. The panels also work Pls the solar panels are down but at a greatly reduced rate.

The Suzuki Crosscage prototype is powered by hydrogen fuel cells. Suzuki Crosscage The prototype is powered by hydrogen fuel cells. Hydrogen fuel cells have the potential of powering a motorcycle for a range surpassing current petrol-powered models. Hydrogen fuel cells have the potential of powering a motorcycle for a range surpassing current petrol-powered models. The Crosscage has the power and equivalent of a standard 125cc bike. The Crosscage has the power and equivalent of a standard 125cc bike. It has an estimated range of about 125 miles. It has an estimated range of about 125 miles.

Electric motorcycles are one of the best “green” transportation options available. Electric motorcycles are one of the best “green” transportation options available.

Brady Daniels is a member of the Motorcycle Insurance Quote writing staff. Brady Daniels is a member of the Motorcycle Insurance Quote writing staff. He writes feature articles about a variety of topics related to motorcycles. He writes feature articles about a variety of topics related to motorcycles